TERADEK BOLT 500 XT

WIRELESS TRANSMISSION OVERVIEW

The Bolt 500 XT 3G-SDI/HDMI Wireless Kit from Teradek includes one transmitter and two receivers. This enables you to immediately start transmitting up to 1080p60 video from either an SDI or HDMI source. The zero-latency transmitter/receiver pair features a 500' line-of-site transmission distance. You can send and receive visually lossless 3G-video signals from a Bolt 500 transmitter with zero latency. The transmitter features cross conversion, so you take an SDI signal in and loop out either an SDI or HDMI signal to your on-camera monitor. The receiver also features both SDI and HDMI outputs, and the system supports digital SD and HD signals. Although the inputs and outputs support a variety of HD signals in both 50 and 60 Hz standards, as well as 480i and 576i, only HDMI supports 480p and 576p. You can transmit up to three other 3rd-generation Bolt receivers as the transmitter can support up to four receivers. The built-in AES 128-bit encryption helps keep your transmitted video safe from prying eyes.

SPECS

  • < 1 ms

  • Up to 500' / 152.4 m Line of Sight

  • 1080p 23.98/24/25/29.97/30/50/59.94/60

    1080psf23.98/24/25/29.97/30

    1080i50/59.94/60

    720p50/59.94/60

    480p59.94/576p50 (via HDMI ports only)

    480i(NTSC)/576i(PAL)

  • Bolt 500 XT TX

    Video Inputs

    SDI: 1 x BNC (75 Ohm), 3G/HD/SD

    HDMI: 1 x HDMI type A receptacle

    Video Outputs

    SDI: 1 x BNC (75 Ohm), 3G/HD/SD, loop through

    Bolt 500 XT RX

    Antenna Ports

    5 x RP-SMA Female

    Video Connectors

    1 x BNC (3G-SDI) Output

    1 x HDMI (HDMI 1.4) Output

    Other I/O

    1 x USB Mini-B USB 3.1 Gen 1 Input

  • SDI: YCbCr 4:2:2, 10-bit (8-Bit when Format Conversion is Enabled)

    HDMI: RGB 4:4:4, 8-Bit

  • Bolt 500 XT TX

    Audio Compression: 48kHz 24-bit PCM

    Audio Input: Embedded SDI/HDMI Audio Input (2 channel)

    Audio Output: N/A

    Bolt 500 XT RX

    Audio Compression: 48kHz 24-bit PCM

    Audio Input: N/A

    Audio Output: Embedded SDI/HDMI Audio Input (2 channel)

  • Frequencies

    Non-DFS Frequencies

    UA: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz

    EU & JP: 5.19 to 5.23 GHz

    DFS Frequencies

    US: 5.27 to 5.55 GHz and 5.67 GHz

    EU & JP: 5.27 to 5.67 GHz

    RF Channel Selection

    Auto (non-configurable)

    Encryption

    128-Bit AES

    Noise Rejection

    Can coexist with WiFi and 5GHz cordless phones

  • Bolt 500 XT TX: 17 dBm

    Bolt 500 XT RX: 15 dBm

  • Power Input

    Bolt 500 XT TX: 2-Pin Circular locking connector 7-17 VDC

    Bolt 500 XT RX: 2-Pin Circular locking connector 7-28 VDC

    Battery

    Bolt 500 XT TX: None

    Bolt 500 XT RX: None

    Nominal Power Consumption

    Bolt 500 XT TX: 7.3 Watts

    Bolt 500 XT RX: 9 Watts

    Operating Temperature

    Bolt 500 XT TX: 0-40°C

    Bolt 500 XT RX: 0-40°C

  • Dimensions

    Bolt 500 XT TX: 109 x 66 x 27 mm

    Bolt 500 XT RX: 147 x 88 x 25 mm

    Weight

    Bolt 500 XT TX: 282 g

    Bolt 500 XT RX: 376 g